|
COFFEE PACKAGING & AROMA SYSTEM DEGASSING VALVE |
|
 |
Packaging for roasted coffee has always posed a problem for coffee manufacturers as coffee beans continue to give off gases after packaging, with the inevitable bag "pop" or explosion which ensues, inevitably wasting the coffee packed within. Now-a-days that problem has been eliminated by the clever introduction of the Aroma System Degassing Valve. As shown below, a small valve has been included in the manufacture of the coffee packaging. As the gas pressure increases within the package the valve is designed to release the excess gas and reseal itself after doing so. The rich coffee flavor and the fresh Aroma of the coffee, remains. The package will now remain intact sealing in the coffee freshness and preventing expensive wastage. What a clever and most ingenious design and it is an addition to coffee packaging that definitely reduces waste which inevitably increases the bottom line. You can't be without this very valuable addition to your coffee packs.
We also supply vacuum pack bags especially designed for the vacuum packing of ground coffee. These bags do not require degassing valves as most gas is produced by the full fresh coffee bean.
|
|
At All About Packaging, we also have our own in-house Graphic Design and Printing professionals enabling us to design, produce and manufacture exactly the package you want for your product. Quite frankly, if you are a coffee manufacturer and need an effective packaging solution, you really don't need to go any further. Give us a call and let's discuss your needs. |
|
|
AROMA SYSTEM DEGASSING VALVE Valve Design - Filter - Plain paper manufactured from a specially selected blend of high quality manila hemp, cellulose and thermoplastic fibers.
[Valve Body - Polyethylene] [Oil - Silicon oil] [Black Membrane]
Opening Pressure - Range 3 - 4.5 mbar Closing Pressure - About 1 mbar. Storage - Correct performance of the valve is guaranteed for a minimum of 12 months in storage conditions of 10 - 25O C and 30 - 75% relative humidity. Sealing - The valve is sealable to Polyethylene (LDPE, LLDPE). Sealing Temp Range: 130O - 200O Sealing Pressure Range: 3,5 - 5 bars. In function of the packaging material. Approvals - UK: Plastic for food contact application. A code of practice for safety in use, revised edition 1986 statutory instruments 1996, N. 2817 UE: Commission Directives 90/128, 92/39, 93/9, 95/3, 96/11, 97/48 relating to plastic materials and articles intended to come to contact with foodstuffs. USA: FDA 21 CFR 177, 1520, (1996) |
Stand Up Pouch with De-Gassing Valve & Tear Notches |
